Magigoo – The 3D printing adhesive

Single Pen – all you need for sure adhesion of 3D prints

Magigoo is an easy to use 3D printing adhesive designed to address ‘the first layer not sticking problem’. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Isn’t it magic? Regardless of you being a hobbyist or professional – it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.

  • Over 100 applications
  • ABS, PLA, PETG, HIPS, ASA, TPU
  • Easy application
  • Easy release
  • Easy clean
  • No smell
  • Non-toxic
  • No additional tools needed
  • Easy to transport
  • Nicer print finish

Get a single pen. We are sure you will be back for more … it is that good.


Find out more

Contact Russell to find out more, arrange a demonstration or place an order.

50ml/24mm applicator:

24.95 AUD

120ml/33mm applicator:

64.95 AUD


* All prices Inc. GST. Single pen only. Delivery/install costs may apply.



Up BoxUp Box

Magigoo PC – The 3D printing adhesive for Polycarbonate

Magigoo PC is designed to work exclusively with Polycarbonate type filaments. This adhesive for professional use, makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.

Why Magigoo PC?

The strength and toughness of PC make it an ideal FDM material for the production of functional prototypes as well as end use part, nonetheless the material does present some printing challenges. Virgin PC has a high glass transition temperature (Tg) and thus can be used in high temperature applications. However, having a high Tg can make it very difficult to print using desktop printers, as these are usually not equipped to cater for the high printing temperatures required to print virgin PC. Virgin PC in fact tends to warp considerably when printed at an insufficient bed temperature (<130 ºC), in non-heated enclosed chambers without the use of an appropriate bed adhesive.

Magigoo PC can be used on glass or a multitude of other surfaces. Use on other plastic based surfaces, including sheets is recommended to provide strong adhesion and preventing the part from fusing to the sheet.

Get in touch

34.95 AUD

* All prices Inc. GST. Delivery/install costs may apply.


Magigoo PP – The 3D printing adhesive for Polypropylene

Magigoo PP is designed for professional use, to work exclusively with Polyporepylene filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off if the included procedure is followed.

Why Magigoo Polypropylene?

Polypropylene (PP) is a thermoplastic semi-crystalline polymer exhibiting properties of good impact resistance and ductility. It also has a relatively non-polar molecular structure which makes it chemical resistant and thus ideal for use in food packaging and medical equipment. It is in fact well known in the adhesive industry that it is difficult to adhere polyolefin materials to other types of materials. This combined with the partial crystallinity makes it an especially hard material to print with.

Magigoo PP solves this issue and provides additional convenience for use in FDM 3D Printing.

Get in touch

34.95 AUD

* All prices Inc. GST. Delivery/install costs may apply.


Magigoo PA – The 3D printing adhesive for Polyamide (nylon)

Magigoo PA is designed for professional use, to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

Why Magigoo PA?

PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA66 and PA6.

Sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibers. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.

Nylon filaments prove to be challenging materials for FDM printing due to their lower adhesion to conventional 3D-printing build surfaces and their higher tendency to warp. Furthermore there are several classes of PA filaments each behaving differently.

MAGIGOO-PA is a specialized solution for FDM printing of PA filaments which was developed to work with a wide number of PA types.

Get in touch

34.95 AUD

* All prices Inc. GST. Delivery/install costs may apply.


Get In Touch

Contact Russell to find out more, arrange a demonstration or place an order.